Use code CLEETUS50 to get 50% OFF your first Factor box plus 20% off your next box at https://bit.ly/3xeZTKK
Today we opened up McFarland Science, threw on our lab coats, and slapped some JB weld on an LS… does it get any better? Let’s see if it can hold any power!
http://cleetusmcfarland.com to check out all of our Cleetus shirts, hats, stickers and more!
FREEDOM FACTORY in person tickets – https://www.thefoat.com/freedomfactory
For advertising inquiries, email Cleetus@outloudtalent.com
Our 2024 Sponsors:
https://www.holley.com
https://texas-speed.com
https://www.motionraceworks.com
https://www.nittotire.com
https://www.summitracing.com
https://heatwavevisual.com
Use code CLEETUS50 to get 50% OFF your first Factor box plus 20% off your next box at https://bit.ly/3xeZTKK
We got Science Cleet here along with Head Chef Jaaaaaaames
instead of sticks to apply, should of piped it on like a cake maker.
Head gasket out of cardboard?
Good work!
Id of cut the head gasket for a spacer lol
what ever happpend to the diesel galaxy
Bros wearing a chef jacket lololol
Fast forward better every time
5.7l
295hp
Where's the rest?
RIP
external combustion
Used corvette for sale, well maintained never abused
I love how nobody thought to just make your washers out of the old head gasket.
Corvette fur sale
Gently loved
Never raced
Never seen rain
Hey Cleeter been a long time follower you should collaborate with @speedbumpgarage. This kid has potential and can help bring in the younger generation. It'll help save our tracks. Just a suggestion.
Sounds like a diesel
Next science video, I want to see you weld the head to the block.
A corvette that only gets 295 hp?
Mini Science question, Does using Cam 2 richen mixture compared to pump gas with ethanol?
It's got a set of them new self clearance pistons
What I would do is put a layer or JB weld on the head, and let it cure some but don't let it fully cure. Then put another coat on it. Build it up not letting it fully cure then put the final coat on, and torque it down. It still won't work but that's what I'd do. Side note: I have broken every vehicle I have ever attempted to work on…so take my advice with a whole lot of salt. I can fix guns without an issue, but I can screw up an oil change. By the way, I used JB weld to put bever tales on my Glock pistols, because the slide was always taking a hunk of skin out of my hand. It works great. One has a gray frame, it matched perfectly.
Why not cut the head gasket into washers???
Attempt #25 asking to run a transmission off of laundry detergent
Don't put the washers on it .
I had a racing lawn mower and I JB WELDED THE HEAD ON AND RACED IT FOR 4 OR 5 YEARS AND IT WAS STILL RUNNING WHEN I RETIRED IT. LOL
Legit sounds like a diesel LS1 lol
Should have used a bage and squeezed it on there and let it sit overnight, and it will work.
JB on both surfaces Science Guys
I bet if you didn’t use the quick setting jb weld and used the slow original stuff it would’ve held, my grandpa sealed a bad cracked head with it on a ford pickup and it held for years and never failed
To be honest I am absolutely shocked your homemade, Mechanic in a tube head gasket did not hold. In no way did ANYONE see this result coming. I honestly thought there was nothing, absolutely nothing, that could possibly go wrong. Maybe taking the bolts out will help?? Lets find out. LOL
Those washers looked much thicker than the compressed thickness of the head gasket. You should have cut spacers from the old head gasket and tried that.
All the boys had to do was to cut the gasket to pieces and use those bits around the headbolt holes….
You Are Crazy! I Love You!
Ls1 just wont die
From experience, jb weld will hold a popped spark plug in for about 500 miles
Plumbing putty
My heads were so shot ,JB weld made it run like new brother
4 washers!!???!?!? , i'd do as many washers, as head bolts!
I'm 4mins in, Workin on 1 of my R/C Trucks, n JUST Realized!!, NEW RUBY!!!!!!!!!!!!!!!!!!!!!!!❤❤❤❤