Here’s Part 2 of the T-5 Manual Transmission Rebuild video with Paul Cangialosi & EricTheCarGuy.
Link to Part 1: https://www.youtube.com/watch?v=XREsRG9Y1mU
Full/Extended Version of this video: http://www.ericthecarguy.com/premium-content-web/13-premium-content-videos/1434-ultimate-t-5-manual-transmission-rebuild-with-paul-cangialosi-ericthecarguy-full-extended-version
Paul Cangialosi stopped by the shop to help me rebuild the T-5 for my Fairmont Project. Paul has been building these transmissions for more than 30 years. He also sells the rebuild kits for these builds on his website 5Speeds.com. Not to mention he literally wrote the book on rebuilding these transmissions. Definitely the right man for the job.
There’s a ton of links I need to trow at you so I’m going to keep this part of the description short.
Camera: Brian Kast
Thanks for watching!
Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/61669-ultimate-t-5-transmission-rebuild-video#155495
The best place for answers to your automotive questions: http://www.ericthecarguy.com
Visit http://www.5speeds.com for more helpful information from Paul Cangialosi.
Pauls book on rebuilding manual transmissions: http://www.5speeds.com/cart/index.php?route=product/product&product_id=33
Electronic version of Paul’s book: https://books.google.com/books/about/How_to_Rebuild_and_Modify_High_Performan.html?id=OexeE4mTsZYC
Paul’s YouTube Channel: https://www.youtube.com/user/GearWorldTV
T-5 Rebuild Kit: http://www.5speeds.com/cart/index.php?route=product/product&path=33&product_id=52
T-5 Counter-gear Stabilizer Kit: http://www.5speeds.com/cart/index.php?route=product/product&product_id=61
Aerobic Sealer: http://www.5speeds.com/cart/index.php?route=product/product&path=33&product_id=66
Dynatex Gasket Maker: http://www.helmarparts.info/ProductDetails.aspx?pn=DY-47206&name=BLACK%20GASKET%20MAKER%20TRIGGER%20CAN|
Transmission Assembly Lube: http://www.5speeds.com/cart/index.php?route=product/product&path=33&product_id=67
Other T-5 Parts: http://www.5speeds.com/cart/index.php?route=product/category&path=75_18_68
Other Transmission Rebuild Kits from Paul: http://www.5speeds.com/cart/index.php?route=product/category&path=33
Royal Purple Syncromax: http://www.amazon.com/Royal-Purple-Synchromax-Performance-Transmission/dp/B001DKTG0G/ref=sr_1_1?ie=UTF8&qid=1449507487&sr=8-1&keywords=royal+purple+synchromax
Tools
Sunex 20ton Shop Press: http://www.sunextools.com/index.cfm?s=detail&subcat=129&item=356
OTC Bearing Splitters: http://www.jbtoolsales.com/search.php?q=OTC+bearing+splitter#oid=1002_1
Roloc Plastic Bristle Gasket Remover: http://www.jbtoolsales.com/3m-007529-1-roloc-3-bristle-disc-120-grit#oid=1002_1
Beta Snap Ring Pliers: http://www.jbtoolsales.com/search.php?q=beta+tools+cerclip+Pliers#oid=1002_1
Torque wrenches: http://www.jbtoolsales.com/search.php?q=torque+wrench#oid=1002_1
Dead Blow Hammer: http://www.jbtoolsales.com/gearwrench-82257-dead-blow-hammer-32-oz#oid=1002_1
Parts Washer: http://www.jbtoolsales.com/performance-tool-w54040-20-gallon-parts-washer#oid=1002_1
Related Videos
T5 World Class Rebuild Kit Parts. Visiting EricTheCarGuy: https://www.youtube.com/watch?v=SzsBiHjsXxE
How Synchronizers Work (5Speeds.com): https://www.youtube.com/watch?v=MXsRfbOiBhE
What Speedometer Gear is Right For You?: https://www.youtube.com/watch?v=fMEe5SySuxA
A Quick Easy Way To Determine Axle Ratio: https://www.youtube.com/watch?v=xY1mcbotJ9A
A Brief History of the T-5 Transmission: https://www.youtube.com/watch?v=oVPAeTnRdA0
How a Clutch Works: https://www.youtube.com/watch?v=FfjGohWy-OU
How To Diagnose a Bad Clutch: https://www.youtube.com/watch?v=h7JJ_g2UuBI
How To Adjust a Cable Clutch: https://www.youtube.com/watch?v=I4CUBB01qX8
Transmission issues: http://www.ericthecarguy.com/faq/solving-transmission-problems
Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts
Twitter: https://twitter.com/EricTheCarGuy
Instagram: http://instagram.com/ericthecarguy
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
At 1:05:30 he said make sure the pin is in the middle. On my AMC T5 for my Jeep CJ seven there is no way that that thing will go together if that pin is dead center in the middle you have to offset the forks towards the front of the transmission or they will not lineup. You can see when he tried to set it n his wold to line up either. He had to move off center. Thats why the camera cut scene.
Robert Dinero of the transmissions
Thank you! Recessed and double diameter punches coming soon!
Good day gentlemen. Hope everything is well with you. I have a question. My son bought a t 5 Mustang Gt 1986 at a junkyard.hard to put in gears. Well opened the transmission and the interlock plate is broken in two pieces everything else in good condition. Could you please help me get a interlock plate for my son Transmition.im willing to pay for the part and any other cost involved, love your info highly appreciated. My email Rayvz1@ att.net thank you
Love it, certainly a ton of info ðŸ‘ÂðŸÂ»
Absolutely great video guys. Just curious if this is a world class T5 or did you bring a normal T5 up to the world class standards?
That. Was. IMPRESSIVE!!!
I've built my share of T-5's in my day… But I really learned something here!
The previous episode when you introduced the "Man who WROTE the Book" as who would be rebuilding the Trans….
Mind Blown! 😲ðŸ‘ÂðŸ‘Â
@ 26:00…. Maybe find a piece of thick wall PVC pipe with a similar diameter to the bearing to help knock it down the Counter Shaft so you don't have to use a punch. Just a thought. I have not tried it yet but I am going to try it when I go to put my T5 back together. Thank you guys for making these very helpful and informative videos.
Where fo you buy rebuild kit
You are never going to win an Oscar for camera work for YouTube instructional videos , but this is worthy of nomination, great job to everyone – this is brilliant!
Instead of cutting the whole shift housing simply drill out the pin.
That was so well worth watching for over an hour I learned so much and especially that aftermarket piece he put in there
Well done gents. Can you do the same with an automatic trans and more with other manual trans?
Where can I get the peelable shims for the output shaft ?
â¤â¤â¤â¤â¤â¤â¤â¤â¤ðŸ‘ÂðŸÂ»ðŸ‘ÂðŸÂ»ðŸ‘ÂðŸÂ»ðŸ‘ÂðŸÂ»ðŸ‘ÂðŸÂ»ðŸ‘ÂðŸÂ»ðŸ‘ÂðŸÂ»ðŸ‘ÂðŸÂ»ðŸ‘ÂðŸÂ»ðŸ‘ÂðŸÂ»ðŸ‘ÂðŸÂ»ðŸ‘ÂðŸÂ»ðŸ‘ÂðŸÂ»ðŸ‘ÂðŸÂ»ðŸ‘ÂðŸÂ»
Been using these videos as guides. Hopefully it shifts without grinding. Did everything. But the counter shaft bearings
those punches exist. called roll pin punches.
Ohio weather?! Eric what up from Cleveland dawg 👊😎
Excellent video content! Excuse me for the intrusion, I would love your thoughts. Have you considered – Tarbbatigan Cars Rehabilitation Tip (should be on google have a look)? It is a great one of a kind product for learning how to repair your car the easy way minus the normal expense. Ive heard some extraordinary things about it and my friend got cool success with it.
Thanks Eric. Awesome that you linked up with Paul. You guys rock!
I know it's a old video but, what about a video about setting up the bell housing/pilot bearing correctly so you don't toast the "new" 15 input shaft roller bearings?
Eric: clever, well thought out comment on the process
Paul: eh…
51:07 Eric reverts to 12 yrs old for a moment
And there is the official AWESOME SAUCE…..
Another T5 save my ass video, outstanding Paul, and shaft polisher Eric.
Is it just me , or when you make the wrong comparisons while doing “anythingâ€Â, makes it all of a sudden gay as hell to continue watching?
I'm inspecting and rebuilding one now. Paul is the Guru of transmissions hands down. His videos on 5speed.com are great to learn from. He is also very meticulous on his builds and I like that.
Great video. Enjoyed watching a skilled technician. Thank you for sharing your knowledge.
you gonan milk that shaft joke how many times? 20? ok, get it over with.
12:40
Am I the only one who has heard of a role pin punch?
Has a dimple in the center of the flat to keep the file pin centered.
Anyone….
Anyone….
Beuller…..
Yes boy that man Paul is a boss…..
when putting on your bearings, instead of pressing them on or hitting them with a punch,(they should only have about .0005-.001 press fit) heat them in your oven at about 175- 200 degrees for about 5-10 minutes and they will slide on with no problem, that's how we put them on, (I work in a electrical motor shop we use an induction heater to heat the bearings)