**Sponsored Video**I’ve put together this list of recommended tools to bring when you go to the salvage yard. A lot of it is just basic hand tools, but I do have some other recommendations like water and sunscreen. I highly recommend both of those so you don’t end up dehydrated and slightly crispy like I did.
If you’re not familiar with Pull-A-Part, they’re a self service salvage company in the US. They have 25 yards in 12 states. I’m not just saying this, but they’ve become my favorite place to go for salvage parts. I suggest you check them out.
To make it easy, here’s a link to their website: http://www.pullapart.com
The best place for answers to your automotive questions: http://www.ericthecarguy.com
Camera: Erik Tande
Thanks for watching!
Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/64148-recommended-tools-for-the-salvage-yard
**Answers to your automotive questions found here: http://www.ericthecarguy.com/faq
Related Videos
Check Out Pull-a-Part!: https://www.youtube.com/watch?v=g8sDU2N2AQU
Don’t Be a Selfish Tool!: https://www.youtube.com/watch?v=waVeB6mzQP4
What To Look for in a Salvage Engine or Transmission:
Salvage Yard Hack: How To Get Power in the Yard:
Salvage Yard Pulls Playlist:
**Answers to your automotive questions found here: http://www.ericthecarguy.com/faq
Social Network Links
Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts
Twitter: https://twitter.com/EricTheCarGuy
Google+: https://plus.google.com/100195180196698058780/posts
Instagram: http://instagram.com/ericthecarguy
Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Hi thank you I just started working at a Auto salvage yard and wanted to know what tools to get
There is no me without you…if you have any questions feel free to ask or email me! Thanks
Personal favorite tool not listed…"Dogbone" wrench. Made in metric or SAE it has the 8 most common sizes all in one wrench! I almost always use it a the backup wrench when you find the nut and bolt are both 15mm (thanks GM!). How many 15mm's are in your 101 piece tool kit.
Also…wobble extensions…lot of wobble extensions.
Went out and bought work gloves today prepping for the salvage yard and expect to go Thursday or Saturday wish me luck I’m hunting for fuses as in are we certain fuses are very hard to fine
BREAKER BAR!!!! Dont forget breaker bars!
Forget the penetrating oil. Just bring a plastic straw. Dip it in the brake fluid reservoir a car and put your finger over top to capture some fluid, then transfer to your application. Saves weight. Break fluid is a penetrating lube.
Cant tell you enough… SUNSCREEN IS A MUST! I was out on the yard pulling a bumper from a truck, I was under for about 20 minutes and my legs were RED
I would also suggest footwear as in boots or steel toe. Also vise grips and try not to go alone it's much easier and safer.
Eric you forgot to mention first aid kit.
Impact screwdriver, absolutely necessary.
Good to see you doing videos again
All of the above, plus the following: Long breaker bar. Vise grips. Side cutters. If you're making a day of it and getting lots of stuff, bring your shopping list. Some water. A wheelbarrow.
I always take a bundle of despair and exasperation to the salvage yard as well.
Just picked up the same Ryobi impact. Love how powerful it is for how compact it is!
44 seconds in; Stay clean? :O
utility knife or even an older sharp steak knife. If you need to cut hoses wires whatever.
The last tip of taking the same tools you used to remove your part(s) before heading out to the yard. I would also take aditional different sized wrenches/sockets in case the part you need in the yard is attached with replacement fasteners instead of OEM fasteners the car came with.
What brand are those screwdrivers?
Very helpful. Now I just need time to get to the salvage yard. Hehe. Good video, man. =)
hi i work at a junk yard. there is alot of ppl that pull engine from the cars. would like to know if you can make a video on how to tell if the engine is good on not.. i know you showed how to tell about the Manuel transmission.. thank you..
I always have ear plugs. Many times I am hammering on a part and its LOUD!
hi Eric great report i have some
Suggestion please can you make some ETCG1 video with Eric o that will be great … and thank you
Hand truck or wheeled cart to carry tools box really helps. Row A space 54 isn't really far on their map, but carrying a tool box is !!!. great video like always.
This had a very Scotty Kilmer feel to it. Not saying that's a bad thing.
How can i find a savage yard?
I have the exact same 1/2 cordless impact gun. Ryobi right? It works surprisingly well provided the battery is well charged up. Love it. On another note, what happened to you buddy Camerman Brian? (I pay attention to the credits :P).
Once a vehicle is all stripped down of parts at the salvage yard, do they recycle the remaining metal to make new cars?
Does this yard have tools you can rent or borrow? I travel a lot and can't really bring all my tools with me but if I see one of these yards, I might just want to stop in and browse.
we all know thats PB blaster bro, cant hide it lol
I always do what your final tip is…Take off the part that you are going to replace so 1) I know what I'm looking for; 2) I know how to remove it, 3) I know what tools I will need.
I have also learned that I should always take a breaker bar & penetrating oil (trying to get rusty lug nuts off with just a 3/8 ratchet isn't as easy or fun as some might think).
thanks Eric …
Bug Spray.
digging that 95 accord in the background.
Great tips. Thank you.
Eric am shocked you did not mention breaker Bar and gas torch.
What brand are those cordless tools
no side cuts?! insanity
Eric…do a vid on people that ask to use your tools, at the junkyard.
looks like you shop at Home Depot often
You forgot add a swivel sockets
You forgot that some yards have wheelbarrows to help you lug around tools or salvaged parts that you get. Pull-A-Part does.
Great tips.
Eric, do people recognize you everywhere you go and ask you to fix their cars?? It must get pretty annoying???
We need a yard like that up here in the PNW. Funny that everything else up here is high tech but the salvage yards are still luddites…. Only recently brought kicking and screaming on to the web.
Vice Grips and Breaker bar.
That tool box looks heavy already with all those tools jammed in side. Good channel Erick.
I would add a bit driver and a complete set of bits. Especially security Torx bits if you want anything electronic!
It's my birthday 🙂 subcribing now
I await the battery plasma cutter. All those pry~ee pull~ee things are too much trouble.Need a speedo ? Cut the car in 4 pieces and blow it out of the dash. Much like electrical or plumbing work: The mess left behind is the next guys problem.
Sounds like a political strategy ???