Changing Automatic Transmission Fluid and Filter, 1997 Subaru Legacy (Part 1) – EricTheCarGuy
Visit me at: http://www.ericthecarguy.com/
This video is actually a continuation of ‘Solving Engine Performance Issues’, as some of you may know my Subaru has had a problem with hesitation from a stop and I’ve been trying to track down the source. I feel I’ve ruled out an engine performance issue so I decided to try and change the transmission fluid and filter as well as the front and rear differential fluids to see if there was a change to the issue, if you watch the video you’ll see if there was. Here is a link to Part 1 of the Engine Performance series in case you missed it.
Link to part 2
—
Click below and Stay Dirty
Visit me at EricTheCarGuy.com
Visit EricTheCarGuy Forum
http://www.ericthecarguy.com/forum/default.aspx
Visit my Facebook Page:
http://www.facebook.com/EricTheCarGuy
—
Stay dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Did u change the air filter?
Does a clogged filter affects the way the car shifts?
I think I messed up !!!! So question for you, I have a weird sound from the sump now, like air being drawn through . I now know I forgot to put that bloody o ring on the new filter . Do you think this could be the issue
Hi Eric, i have forester 2001 and the auto trans gearbox oil has not been changed.
is the black engine oil filter the same for the auto gearbox filter. thanks lenniecan
As per my bootlegged copy of the FSM the torque is 5.7 FT-LB plus or minus 0.7 FT-LB. Thank you.
that rtv on trans pan was factory on 2002 toyota tocoma
im guessing its not a good idea to change the fluid because all that sludge from the fluid breaking down will introduce gunk to the entire transmission and cause multiple problems?
I think that I might do this at a technical college.. and see if I can fix stuff up.
i had the same issue with my Subaru Impreza 2003 non turbo,, it ended up being the spark plug leads, after replacing the leads it was cured. Did you ever find the fault ?
A fishing line might work also for removing tight stuff
Gr8 vid
I had a similar issues on 2001 Nissan Maxima with 202k miles. Car wouldn’t shift right and was shifting at 4K rpm for all gears. P0744 CEL
As a last resort, I said to myself what else do I have to lose it is already broken. So I did a drain and fill with Valvoline max life synthetic ATF and Lucus . It was a lot better after. But still not right. I also cleared CEL
It came back in 70 miles same code
Continued to drive as it was a lot better
After 330 miles it was about 70% better
After 600 miles it was about 80% better
After 900 miles it was almost normal
I then reset the CEL. The code P0744 kept on coming back every few weeks. Continued to drive it and clear codes. As it got better the more it was driven. Then I look at fluid and it will dirty already. So decided to change fluid again to get more of the old fluid out. Now, So far, no longer having shifting issues or delayed shifting or shutter when starting from a complete stop. Only time will tell
Yah Lucus and Valvoline max life synthetic atf. If this works out it’s basically saved the car. The car is my son’s car now but thru this he has seen first hand how learning some basic mechanic repair skills can really save you $$$.
https://youtu.be/aRZva2DyLuA
Thanks dude! Just what I needed to help me through this project.
how to change the automatic transmission fluid and filter on 2006 nissan altima?
Should’ve used a putty knife to remove the pan.
Is it the same for a h6 outback
My 2003 Civic Lx ATF is low after I changed the fluid. 3 quarter out and 3 in. I drove for about 60 miles and just checked the fluid after the engine off for couple of hours and the fluid level is low. Why is that. There is no sign of any leak whatsoever.
Dude, once again, 'THANK YOU!' for recording this procedure. You are a saint.
why he did not use his lift and raise the whole car up to make it easy ??
Question. I have an L460E transmission in a GMC. There is the rubber grommet around the dipstick tube and a quarter size piece of it fell into the transmission. Should I pull the pan to get it out. I know it wont melt or anything since its made to seal the fluid. Found it when my transmission was leaking while parked sideways on a hill.
Sneak up in here
thank you for posting this. My 98 Subaru Legacy looked identical, even the same pink gunk melted to the pan. Strangely, the Haynes repair manual mentions nothing about this procedure. I wonder what else it's missing? Also. I wasn't able to use the swivel head on my socket but a screwdriver worked just fine.
"im an experienced technician, and i trust what i just did"
proceeds to beat on hose with screwdriver
lmao