Building a Forged VQ37 – Rotating Assembly

23 thoughts on “Building a Forged VQ37 – Rotating Assembly”

1. Keeps talking the vq's down, get a different engine if you don't like it.

2. Still NA and how much power it produce?

3. Wgy not an hr?

4. Veeeery nice

5. I'm glad to see Enjuku doing well nowadays. They use to be in a warehouse district in Clermont Fl back in 2009 and they we're just a small business back then. It's cool to see people from Florida doing well and not on he nightly news.

6. VR engine has closed deck

7. Adam lz “vq is not the best platform for making power” lmao wtf never heard bigger amounts of bullshit in my life

8. Props on the compression ratio. The greatest break from motorhead tradition I've made so far is to add compression and boost at the same time. Those who don't know and parrot what they hear and read without any experience otherwise will say; Boost, or high compression, not both. What they don't know is that modern engine tech turns that into; Boost & high compression, or turbo lag, not both. A high compression turbo street motor is a street-wrinkler and a transmission crusher. That's what my modern chevy V6 became, only I accomplished the compression ratio noted here on premium fuel with water/meth injection assist, which was important to me because the car needed to be truly streetable and that means being able to pull into any fuel station and pump and go. I didn't hear concrete goals mentioned here to put the power levels into perspective; intended boost level and most helpful to your followers, the concrete limit ranges you established on pump fuel. I believe this info is important for the masses because judging from the overly complicated manner in which this motor is designed, requiring excessive disassembly to access certain key parts (I can remove rods and pistons from the GM V6 with the motor sitting in the engine bay fully mounted for example), suggests that a basic rebuild alone is pretty expensive and time consuming, long before one reaches the cost of forged rods and pistons on a motor whos weak link at the ~500/500 point is the rods. Piston technology is pretty well advanced and the stock piston would probably hold well beyond the stock rod limit established and would be more desirable from the point of the original design compatibility and practicality. Just pointing out some things that make performance more affordable for the masses, who are unwilling, or not able to go all out on expenses, but would like to have a smoking fast car.
   Great job on the demo.
   Here is an example source for what happens when the limit is exceeded;
   https://www.youtube.com/watch?v=HypiYUMvESw

9. Just got rod knock was hoping I could dm you to get more info on your build thinking of routes to go

10. 这就是连续14年的十佳发动机吗， 气门间隙消除器 到底是哪种好？

11. What going on with this beast?

12. I just picked up my 40th anniversary 370z, and I belive the motor is a vq37vhr, are these motors the same?

13. I had big dog shirts. Thats 4 OGs

14. building…
    why don't you car guys get it, you don't build engines, you assemble engines. There is a difference. You assemble pre built parts. Building something contains making parts from scratch. You are making something that did not exist before. You even wrote rotating ASSEMBLY. -which implies assembling lol

15. The truck water pump gasket is either for a 94 or 97 Toyota Tacoma/Pickup 4 cylinder engine.

16. Why not just throw 9:1 in it and boost the shit out of it. Crazy power boosted.

17. Is the girdle the same as the 350z hr?

18. Holy shit that VQ is small… the block at least

19. Those Alberto was his own videos….? No offense put he's just rad

20. Vq37De??? Bruh what lol

21. Tf is a vq37dett

22. Is the block itself the stock block?

23. Toyota Tacoma water pump gasket

Comments are closed.