Made sure you isolate the iron/ steel from the aluminum or you’ll get dissimilar metal corrosion.
dude find a way to rust proof those sweet sweet parts you mat for that boat!!!!
So happy to see progress on this finally. I know car content and race prep is what is most important. But, summer is coming. You are going to have so much fun in this beast. Especially when it has a turbo. Definitely just mod the seat. With padding, nobody would even know.
As a goof you guys should try to build a quiet exhaust for the MR2 that routes to a front mount muffler. Plus it would help get weight over the front end. It'll be the worlds most sensible and quietest bumper-dump exhaust lol
Kyle, how would you change the oil? Can you pump it out? Lol
Wrap the mr2 doors plz
Cup holders might get a little hot. Better drink fast. Awesome to see the jet boat coming along.
Are use putting the dash back in the mr2?
Yee
Yeah nah make a metal plate for the switchs that looks Horry as fk
sick!
How long after you turbo that thing will Cleetus unveil the 427 powered jet boat?
Powder Coat the mounts.
When Kyle fired up the MR2 I had a little smile on my face and realized that I was using muscles in my face that I don’t think I’ve used all day. Thank you Boosted Booz for boosting my day. Loving the sound of MR2!!!
Looks good! My only question is, how will you change the oil when the engine mounted? Am I not seeing something.
Tx2k?
Good set up only advice I would give is the steel/aluminum touching doesn't mix well together they will destroy each other corrosion will over take and make a mess for you from just setting around
Cut or dimple the seat then foam fill the seat to cover and smooth out the seat
Figured caint would make it’s way back ☺ï¸Â
Put them pimp wheels on it. Looks pretty bad ass kyle
Kyle, get some acf 50 for the boat dude !!
No tx2k?
Remake those mounts with aluminum. With the two different metals in the salt water and the salt in the air, the corrosion will actually eat the aluminum within a few years no matter how good you rinse the boat out with fresh water after each use.
Use Duralac anti corrosive jointing paste for any connections where you have steel and aluminium touching. It helps prevent premature corrosion especially in boats.
I would love to see you race Cletus or jack stand you got to kick their asses with that Honda motor
Ill be honest….im disappointed that you've been trying to get this mocked up with all the stock parts on the engine. Was completely unnecessary. Not like you couldn't make anything for it. Need to ditch the alternator placement as well. Make a mount behind the engine. Have someone make a mount for the pulley on your driveshaft the same size as the crank pulley. grab an aftermarket intake manifold like you run on the other cars the point the TB downward. Its not like you haven't made custom engine harnesses out of the stack harness before right. Do it right…..love you guys but I'm sure Tom would tell you the same thing. Oh and did you ever thin of running a dry sump oil system? Would probably fair better than using the stock wet sump system plus it makes it easier to do oil changes in the future 🤷â€Â♂ï¸ÂðŸÂ»
Don't forget WAGO, she's an OG just like the hatch ðŸ‘ÂðŸ‘Â💯
Kyle's gonna mess around and have the fastest jet boat. Probably make Cleet push his to the limit lol
MeidasTouch host Ben Meiselas reports on the indictment of the leader of the Republicans' top propaganda media outlet. Visit https://meidastouch.com...
Just waiting for the video of them getting the jet boat back from getting a twisted tea wrap how cleetus and James have mtn dew and Busch
I think you should tow the jet boat to cleetus and cars April 2nd with the minivan. 😜🤩🤙ðŸÂ»ðŸ¤™ðŸÂ»
Made sure you isolate the iron/ steel from the aluminum or you’ll get dissimilar metal corrosion.
dude find a way to rust proof those sweet sweet parts you mat for that boat!!!!
So happy to see progress on this finally. I know car content and race prep is what is most important. But, summer is coming. You are going to have so much fun in this beast. Especially when it has a turbo. Definitely just mod the seat. With padding, nobody would even know.
As a goof you guys should try to build a quiet exhaust for the MR2 that routes to a front mount muffler. Plus it would help get weight over the front end. It'll be the worlds most sensible and quietest bumper-dump exhaust lol
Kyle, how would you change the oil? Can you pump it out? Lol
Wrap the mr2 doors plz
Cup holders might get a little hot. Better drink fast. Awesome to see the jet boat coming along.
Are use putting the dash back in the mr2?
Yee
Yeah nah make a metal plate for the switchs that looks Horry as fk
sick!
How long after you turbo that thing will Cleetus unveil the 427 powered jet boat?
Powder Coat the mounts.
When Kyle fired up the MR2 I had a little smile on my face and realized that I was using muscles in my face that I don’t think I’ve used all day. Thank you Boosted Booz for boosting my day. Loving the sound of MR2!!!
Looks good! My only question is, how will you change the oil when the engine mounted? Am I not seeing something.
Tx2k?
Good set up only advice I would give is the steel/aluminum touching doesn't mix well together they will destroy each other corrosion will over take and make a mess for you from just setting around
Cut or dimple the seat then foam fill the seat to cover and smooth out the seat
Figured caint would make it’s way back ☺ï¸Â
Put them pimp wheels on it. Looks pretty bad ass kyle
Kyle, get some acf 50 for the boat dude !!
No tx2k?
Remake those mounts with aluminum. With the two different metals in the salt water and the salt in the air, the corrosion will actually eat the aluminum within a few years no matter how good you rinse the boat out with fresh water after each use.
Use Duralac anti corrosive jointing paste for any connections where you have steel and aluminium touching. It helps prevent premature corrosion especially in boats.
I would love to see you race Cletus or jack stand you got to kick their asses with that Honda motor
Ill be honest….im disappointed that you've been trying to get this mocked up with all the stock parts on the engine. Was completely unnecessary. Not like you couldn't make anything for it. Need to ditch the alternator placement as well. Make a mount behind the engine. Have someone make a mount for the pulley on your driveshaft the same size as the crank pulley. grab an aftermarket intake manifold like you run on the other cars the point the TB downward. Its not like you haven't made custom engine harnesses out of the stack harness before right. Do it right…..love you guys but I'm sure Tom would tell you the same thing. Oh and did you ever thin of running a dry sump oil system? Would probably fair better than using the stock wet sump system plus it makes it easier to do oil changes in the future 🤷â€Â♂ï¸ÂðŸÂ»
Don't forget WAGO, she's an OG just like the hatch ðŸ‘ÂðŸ‘Â💯
Kyle's gonna mess around and have the fastest jet boat. Probably make Cleet push his to the limit lol
No way is he going to use ALL the bolts!?